Temperature

This is non-intrusive, non-radioactive in-line multiphase meter for measuring flow rates of oil, water and gas from a well stream or in a pipeline. The flow rates of oil, water and gas are calculated based on the measurements obtained by the electrodes and the measurement of the differential pressure across the Venturi inlet. No separating devices, mixers, by-pass lines or radioactive sources are used.

more Reading

back...

» Rotary Meter

Rotary Gas Meter is well known as a positive displacement type of meter, passing pre-determined volumes of gas by means of two counter-rotating rotors or impellers. The output of this model Rotary Gas Meter is a special designed magnetic coupling where one part is fitted inside the meter body and the associated part is placed in the read-out unit. The read-out unit can either be a mechanical index or an electronic index, with or without volume conversion and communication functions. With innovative ideas, sophisticated technology and modular designs resulting in reduced purchase cost and a reduced cost-of-maintenance. The Meter is available from 1” to 6” Nominal Size suitable for medium & low pressures

more Reading

back...

The turbine rotor has helical blades and a known angle relative to the gas flow. The turbine rotor angular velocity is proportional with the gas velocity. The rotating movement of the turbine rotor and it’s primary gear train, all fitted in a pressurized body, drive an externally fitted gear box. An exchangeable eight digit mechanical counter is fitted on top of the gear box. Standard LF pulse transmitters are fitted into the meter counter.  Its a gas metering and flow control equipment with innovative ideas, sophisticated technology and modular designs resulting in reduced purchase cost and a reduced cost-of-maintenance. The Meter is available from 2” to 16” Nominal Size

more Reading

back...

Modular Electronic Volume Conversion Device is designed to convert a gas volume at measurement conditions (line conditions) derived from a gas meter to volume at base conditions. Active inputs are used for pressure and temperature and volume pulses or an encoder input from the gas meter.

more Reading

back...

The first ultrasonic gas flow meter of a new generation. The smallest Custody transfer meter starts from 3”. It is used for volume/volume metering at low and high pressure pipelines and applicable for custody transfer as well as process and control tasks(Any gas including 100% CO₂, Cl₂ etc). designed for uni- and bi-directional gas metering in pipelines up to DN 1200 (48") and pressure loss free installation. Its low energy consumption allows operation with solar energy

more Reading

back...

The Smith Meter^® Positive Displacement Meter performs with unsurpassed accuracy and durability.  Boasting high stability and a low pressure drop, Smith PD meters offer unmatched service life and ease of maintenance. From petroleum production, to marketing, to transportation FMC Smith is the most trusted supplier of positive displacement metering equipment.

more Reading

back...

For pipelines, terminal load racks and crude oil service, the Smith Meter^®Turbine Meter line provides the optimum solutions.

more Reading

back...

The Smith Meter Ultra⁶ Liquid Ultrasonic Meter is the culmination of FMC Technologies' long history of measurement expertise technology. The Ultra⁶ utilizes transit time technology to provide highly accurate measurement, in the same tradition as the Smith Meter Positive Displacement and Turbine Meters. The non-intrusive design has no moving parts to provide a low maintenance measurement solution and offers a wide dynamic flow range, wide viscosity application range with low differential pressure.

more Reading

back...

When operators select preset solutions for marketing terminals, the overwhelming choice is the Smith Meter^® AccuLoad^® III family of products. The AccuLoad III product line provides the power, flexibility and configurability required for today's highly efficient and regulated terminals. By offering a wide variety of loading arm configurations - mixing blend arms with straight product - AccuLoad III maximizes efficiency and product throughput like never before.

AccuLoad III offers a variety of product blending configurations. Up to six products can be blended via either sequential or ratio methods. Enhanced additive controls include piston, standard metered or smart, as well as higher-volume additive with flow control

more Reading

back...

Offers a non-intrusive means for flow measurement. The technology using clamp-on transducers is becoming very popular for process measurement and control applications because of the advantages it offers in terms of ease of mounting, zero pressure loss and suitability for use in corrosive or toxic fluids without compromising on safety.

The instruments are  available for Liquid as well as Gas metering applications.

more Reading

back...

Pilot-controlled pressure regulator for Low medium and high pressure applications can be  fail close regulator or fail to open.  This is used in the non corrosive Gas application for Main NG Pipe line, Distribution lines, Large and Medium industries.

more Reading

back...

Pressure regulators are direct action devices for low and medium pressure, controlled by a diaphragm and counter spring. These regulators are suitable for use with previously filtered, non corrosive gases.

The smaller type is largely used both in domestic and industrial installations using Natural gas, LPG or not corrosive gases. These regulators have been conceived to be directly installed on user’s flow meter or assembled on riser shafts for civil uses. They can be installed in any position provided that they are protected against atmospheric agents.

more Reading

back...

These has been invented in order to guarantee a constant rate of odorization in compliance with the gas flow rate no matter the type of gas odorant used or the odorization rate required.

This plant undoubtedly represents a significant step forward in the technology of odorization of natural gas and LPG. The electronics is easy to calibrate and regulate, the operations for setting up the functions are simple and intuitive and completely guided by interactive software menus.

more Reading

back...